Decoration must see the complete collection of woo

Decorative panel

it is planed or spun with natural wood with a thickness of 0.2? 1？ It is made of thin sheets of plywood, fiberboard, particleboard and other substrates after splicing. This kind of material has clear texture and natural color. It is a kind of higher decorative material

medium density fiberboard

density fiberboard is a kind of man-made board. It takes plant fibers as raw materials, through chipping, fiber separation, slab forming (mixed with resin glue and additives for pavement), and plasticizes cellulose, hemicellulose and lignin under hot pressing

fiberboard

according to the unit weight, it is divided into hard fiberboard, semi hard fiberboard and soft fiberboard. Hard fibreboard is mainly used for the panel of ceiling and partition wall. The panel surface is drilled to form various patterns, and the surface is sprayed with various paints, so the decorative effect is better. The hard fibreboard has good sound absorption and waterproof performance, is solid and durable, and is convenient for construction

yellow pineapple wood

the wood has luster, obvious and uniform growth rings, soft material, easy to dry and process, beautiful wood color and pattern, good paint and cementation performance, not easy to crack, good corrosion resistance, and is the material of high-grade furniture

camphor wood

aroma, anti-corrosion, insect proof, slightly light material, not easy to deform, easy to process, smooth section, beautiful color after painting

oak wood

hard texture, large proportion, high strength and dense structure. It is resistant to moisture and wear, not easy to cement, good coloring performance, rough texture, rough tracheids, obvious wood rays, and not easy to dry. Generally, it can be used as wood floor or furniture

Fraxinus mandshurica

material is slightly hard, with beautiful patterns, good corrosion and water resistance, easy processing, high toughness, cemented paint, good coloring performance, and good decorative performance. It is a kind of wood used more in decorative materials at present

melamine board

the full name is melamine impregnated adhesive film paper facing man-made board. It is a decorative board made of paper with different colors or textures soaked in melamine resin adhesive, then dried to a certain degree of curing, paved on the surface of particleboard, medium density fiberboard or hard fiberboard, and hot pressed

plywood

plywood is a three-layer or multi-layer plate-like material made of wood sections that are spun into veneers or sliced into thin wood by wood planing, and then glued with adhesives. Usually, odd layers of veneers are used, and the fiber directions of adjacent layers of veneers are glued perpendicular to each other. The surface and inner layers are symmetrically arranged on both sides of the central layer or core

thin wood veneer

Fraxinus mandshurica, willow mahogany, colored wood, birch, etc. are spun into 0.1-0.5mm thick thin slices, glued with plywood as the substrate, with beautiful patterns and good decoration

Liu'an wood

the material is moderate in weight, slightly coarse in structure, easy to process, good in cementation, and slightly warped and cracked during drying. It is mostly used to make plywood or plywood

Cunninghamia lanceolata

is light, easy to dry, easy to process, rough section, medium strength, easy to split, and good adhesion. It is a commonly used medium-grade wood at present

Catalpa wood

the wood is glossy, slightly coarse in structure, slow in drying, not easy to warp, easy to process, and strong in nailing force

basswood

material is soft, greasy, wear-resistant, corrosion-resistant, not easy to crack, fine grain, easy to process, strong toughness. It has a wide range of applications and can be used to make decorative materials such as wood thread, blockboard, wooden crafts, etc

rosewood

hard material, not easy to process, not easy to dry, strong nail holding force, good cementation and paint performance. Suitable for decorative boards and high-end furniture

bagasse particleboard

bagasse is the residue after sugar production. The chemical composition of bagasse after pulping is similar to that of wood, and it is a good raw material for board production. Due to the small proportion of bagasse and good fiber quality, the board produced has high strength, light weight and low water absorption and expansion rate. It is a medium density particle board with smooth surface, beautiful color, good dimensional stability, good machining performance and decorative performance. Usage: suitable for furniture, construction, carriage, ship, packing box and other manufacturing industries

particleboard with gradient structure

from the surface of particleboard to the center, the particleboard gradually changes from small to thick, and the surface core layer has no obvious change, so it is paved by air flow paver. The surface is fine and smooth, with high strength, good dimensional stability, good machinability and surface decoration

OSB

OSB is a kind of man-made board that takes small-diameter wood, thinning wood, wood core, veneer, branch wood, etc. as raw materials and is processed by special equipment to grow 40mm, 70mm, 5mm, 20mm wide, 0.3mm, 0.7mm thick shavings. After drying, sizing and special equipment, the surface and core layer shavings are crisscrossed and directionally paved, and then hot pressed. Because OSB adopts special technology and many special equipment, it has the advantages of high bending strength, small coefficient of linear expansion, good dimensional stability, strong nail holding force, easy surface decoration and so on. It is widely used in bags

宁波男科医院

北京耳鼻喉医院

徐州男科医院

贵阳性病医院